ZipWall® 4PL, 4-Pack Kit with Carry Bag, 4PL

4-Pack Plus
Description Price
4715-0004 ZipWall Dust Barrier Kit 4 Poles, Parts 2 Rails&Zip 1Bag*SPF $311.95

Description

English

Each ZipWall® 4 Pack Plus kit (4PL) contains four 12’ aluminum Spring Loaded poles (SLPs) and accessories, 2 Foam Rails, 1 box of Standard Zippers, and 1 Carry Bag. That makes the 4 Pack Plus a great dust barrier kit for contractors, maintenance crews and home owners. The ZipWall® system means fast easy installation. A 30 foot long 11 foot high barrier takes 1 hour to build using conventional methods. With the ZipWall® system, the same dust barrier can be completed by one person in under 5 minutes. And since no tape or staples are used, costly repairs to painted surfaces are eliminated.

The ZipWall® Dust Barrier System is patented and has many advantages over conventional methods. The twist-locking pole lets you raise the sheeting without a ladder. The non-skid, non-marking material at the top grabs the ceiling, while the non-skid GripDisk under the foot keeps the pole locked in position at the floor. Spring Loading lets you lift the pole to tuck the sheeting underneath for easy setup. It also maintains constant tension on the barrier, to compensate for movement at the ceiling or at the floor if the poles are bumped, or if there is a lot of air movement.

All ZipWall poles are ideal for dropped ceilings. Spring Loading automatically adjusts the pole height to compensate for any movement of the grid during setup. Just place the poles so the tops push against the grid, then follow the grid until you’ve contained the area.

SLP poles extend from 4 feet 7 inches to 12 feet. They are clear anodized aluminum and weigh just 1.5lbs each. Poles should be placed every 8' to 10' or closer if there is a lot of air movement. A GripDisk under each pole secures the pole on smooth flooring like vinyl or wood. SLP poles can accept any plastic or cloth sheeting up to 8 mils thick and can support up to 110 lbs. The included Carry Bag can hold up to 12 poles. For improved performance, use our Tight-Seal accessories. The 4 Pack Plus gives you the option of using Foam Rails at the ceiling. Simply replace the standard head on the pole with a Foam Rail and raise it to press the plastic sheeting against the ceiling. Overlap the Foam Rails slightly and you have a continuous dust-tight seal along the ceiling.

Descripción Español

Cada
ZipWall ® 4 Pack Plus kit (4PL) contiene cuatro de 12 "de aluminio
primavera polos Loaded (SLP) y los accesorios, 2 carriles de la espuma,
una caja de cremalleras estándar, y una bolsa de transporte.
Eso
hace que el paquete de 4 Plus un kit de polvo gran barrera para los
contratistas, las cuadrillas de mantenimiento y los dueños de casa.
El sistema ZipWall ® es sinónimo de rápida instalación fácil. A 30 pies de largo 11 pies de alto barrera es de 1 hora de construir con los métodos convencionales. Con el sistema de ZipWall ®, la barrera del mismo polvo puede ser completada por una persona en menos de 5 minutos. Y puesto que no hay ninguna cinta o se utilizan grapas, costosas reparaciones a las superficies pintadas se eliminan.

El polvo ZipWall ® Sistema de Barrera está patentada y tiene muchas ventajas sobre los métodos convencionales. El polo giro de bloqueo le permite elevar la lámina sin escalera. El
antideslizantes, que no dejan de material en la parte superior atrapa
el techo, mientras que el GripDisk antideslizante mantiene por debajo
del pie del poste en posición de bloqueo en el suelo.
Carga de la primavera le permite levantar el poste para meter debajo de la lámina para una fácil configuración. También
se mantiene la tensión constante en la barrera, para compensar el
movimiento en el techo o en el suelo, si los polos se tropezó, o si hay
mucho movimiento de aire.

Todos los polos ZipWall son ideales para techos caído. Primavera
de carga ajusta automáticamente la altura del poste, para compensar
cualquier movimiento de la red durante la instalación.
Sólo
tiene que colocar los postes para las copas de presión contra la red, a
continuación, siga la red hasta que haya contenido la zona.

Postes de SLP se extienden a partir de 4 pies y 7 pulgadas a 12 pies. Ellos son de aluminio anodizado y pesa sólo 1.5 libras cada uno. Postes deben ser colocados cada 8 'a 10' o más si hay mucho movimiento de aire. A GripDisk bajo cada polo mantiene la pole en suelos lisos como el vinilo o madera. Polos
SLP puede aceptar ninguna de plástico o láminas de tela de hasta 8
milímetros de espesor y puede soportar hasta 110 libras.
La bolsa de transporte incluida puede contener hasta 12 polos. Para un mejor rendimiento, utilice nuestra estrecha-Seal accesorios. El Pack Plus 4 te da la opción de usar los carriles de la espuma en el techo. Sólo
tiene que sustituir la cabeza de serie en el poste con un carril de la
espuma y elevarla a la prensa las láminas de plástico en el techo.
Superposición de los rieles de espuma ligeramente y tiene una continua prueba de polvo sello a lo largo del techo.

 

Important Shipping Information

NOTE: **NO AIR**

Any product with *NO AIR* can be sent 1 day, 2 day, 3 day air but a hazmat fee will apply. You will be contacted for hazmat fees if you choose an air service. There is no fee if shipped ground.

International orders: Please check if this product is shippable to your country. If listed no, we can't ship this product to your country with any method.

Any items marked as HAZMAT are non-returnable.

NOTE: **FREIGHT**

Any product with *FREIGHT* is an item that must be shipped via truck. Additional products will be boxed and banded with your freight item. (if applicable).

For a freight shipment, we assume that your address is a commercial address with either a dock or a forklift capable of moving your freight item.

Due to varying shipment factors, the quote price provided is an APPROXIMATE price quote, you will be contacted with final freight charges along with scheduling a delivery time. Your order will not be charged until we schedule a delivery time.

Also purchase on Amazon.com

UPC Codes

UPC Code: 641877104004